G5 - General Purpose, Flame Retardant Heat Shrink Tubing

Applications

G5 is a polyolefin material heat shrinkable tubing that complies with current environmental regulations. It is widely used in industrial and commercial fields, such as outer insulation protection of wire splices, metal pipes, electronic components, and so on.

Approvals / Specifications

UL224 File no. E255532, 125℃ VW-1 600V

Operating Temperature Range

Continuous operating temperature: -55℃ ~ 125℃
Minimum shrink temperature: 70℃
Full recovery temperature: Above 110˚C

Color

Standard color: black, white, red, blue, yellow, green, (Other colors, special size, and cut pieces are available on request.) 35mm ~ 180mm (35mm included) is without printing on the tubing (blank tube)

Characteristics

Shrink ratio: 2:1
Very flexible, high flame retardant
Resistant to common solvent liquid
Excellent physical, chemical and electrical performance
Compliance with RoHS

Technical Data

Property	Specification Requirement	Test Method	Typical Value
Longitudinal change	-10%～10%	ASTM D2671	Pass
Tensile strength	≥10.3MPa	ASTM D2671	≥11.3MPa
Elongation at break	≥200%	ASTM D2671	≥400%
Tensile strength after aging	70% of initial value	ASTM D2671 (158˚C/168 hrs)	≥80%
Elongation at break after aging	≥100%	ASTM D2671 (158˚C/168 hrs)	≥200%
Heat shock	No cracking	ASTM D2671 (200˚C/4 hrs)	No cracking
Low temperature flexibility	No cracking	ASTM D2671 (-30˚C/1 hrs)	No cracking
Dielectric voltage withstand	AC2500V/60S No breakdown	ASTM D2671	No breakdown
Volume resistivity	≥10¹⁴Ω‧cm	ASTM D2671	≥10¹⁴Ω‧cm
Dielectric strength	≥19.7kV/mm	ASTM D2671	22 kV/mm
Flammability	VW-1	UL224	Pass

Specification

Part Number	Nominal Size (mm)	As supplied (mm)		After recovered (mm)		Standard Length (Meter)
Part Number	Nominal Size (mm)	I.D. (D)	W.T. (W)	I.D. (max) (d)	W.T. (min) (w)	Standard Length (Meter)
G5-0008	0.8	1.0±0.2	0.15±0.05	0.6	0.25	200
G5-0010	1.0	1.5±0.3	0.20±0.05	0.7	0.33	200
G5-0015	1.5	2.0±0.3	0.20±0.05	0.8	0.34	200
G5-0020	2.0	2.5±0.3	0.20±0.05	1.1	0.34	200
G5-0025	2.5	3.0±0.3	0.25±0.05	1.25	0.42	200
G5-0030	3.0	3.5±0.3	0.25±0.05	1.5	0.42	200
G5-0035	3.5	4.0±0.3	0.25±0.05	1.75	0.42	200
G5-0040	4.0	4.5±0.3	0.25±0.05	2.0	0.42	200
G5-0045	4.5	5.0±0.3	0.25±0.05	2.25	0.42	100
G5-0050	5.0	5.5±0.3	0.28±0.05	2.5	0.52	100
G5-0060	6.0	6.5±0.3	0.28±0.05	3.0	0.52	100
G5-0070	7.0	7.6±0.3	0.30±0.07	3.5	0.56	100
G5-0080	8.0	8.6±0.3	0.30±0.07	4.0	0.56	100
G5-0090	9.0	9.6±0.3	0.30±0.07	4.5	0.56	100
G5-0100	10.0	10.7±0.4	0.30±0.07	5.0	0.56	100
G5-0110	11.0	11.7±0.4	0.30±0.07	5.5	0.56	100
G5-0120	12.0	12.7±0.4	0.30±0.07	6.0	0.56	100
G5-0130	13.0	13.7±0.4	0.35±0.08	6.5	0.69	100
G5-0140	14.0	14.7±0.4	0.35±0.08	7.0	0.69	100
G5-0150	15.0	15.7±0.5	0.35±0.08	7.5	0.69	100
G5-0160	16.0	16.7±0.5	0.35±0.08	8.0	0.69	100
G5-0170	17.0	17.7±0.5	0.35±0.08	8.5	0.69	100
G5-0180	18.0	19.0±0.5	0.40±0.10	9.0	0.77	100
G5-0200	20.0	21.0±0.5	0.40±0.10	10.0	0.77	100
G5-0220	22.0	23.0±0.5	0.40±0.10	11.0	0.77	100
G5-0250	25.0	26.0±1.0	0.45±0.10	12.5	0.87	50
G5-0280	28.0	29.0±1.0	0.45±0.10	14.0	0.87	50
G5-0300	30.0	31.5±1.0	0.45±0.10	15.0	0.87	50
G5-0350	35.0	36.5±1.0	0.50±0.10	17.5	0.97	50
G5-0400	40.0	42.0±1.5	0.50±0.10	20.0	0.97	50
G5-0450	45.0	47.0±1.5	0.50±0.10	22.5	0.97	25
G5-0500	50.0	53.0±2.0	0.55±0.10	25.0	0.97	25
G5-0600	60.0	63.0±3.0	0.60±0.15	30.0	1.17	25
G5-0700	70.0	71.0±3.0	0.60±0.15	35.0	1.17	25
G5-0800	80.0	81.0±3.0	0.65±0.15	40.0	1.20	25
G5-0900	90.0	91.0±3.0	0.75±0.15	45.0	1.30	25
G5-1000	100	101.0±3.0	0.75±0.15	50.0	1.30	25
G5-1200	120	121.0±4.0	0.80±0.20	60.0	1.40	15
G5-1500	150	151.0±4.0	0.80±0.20	75.0	1.50	15
G5-1800	180	181.0±4.0	0.80±0.20	90.0	1.60	15